⏰ Last Chance Black Friday Deals – Save More Today!

Delivery guy dropped the pallet right at the end of my gravel driveway and took off. Weighs over 200 lbs easily. Took me and my brother half an hour to drag it into the bay, but man, once it was unpacked, it blew me away.

Third drawer down was catching a bit when fully loaded with the impact sockets. Sprayed some white lithium grease on the ball bearings and now it slides smooth. Taking one star off for that, but the tools are top grade.

Checked the 1/2 drive deep sockets against my old Craftsman set. These have noticeably thicker walls and the broaching is tight on bolt heads. Quality metal.

The flex-head socket wrenches in Insert 4 saved my knuckles on a starter motor bolt tucked behind an exhaust manifold. Worth their weight in gold.

Loaded this onto my car hauler ramp to test stability. Kicked the wheel brakes on and the cart stayed glued to the steel diamond plate.

The cart itself is fully loaded, but bolting the four heavy-duty wheels to the base plate while the box is tilted is a two-man job. Worth it for the stability.

The black metal push handle had a small chip near the bolt hole from packing. Touched it with a black marker and forgot about it. The drawers and tools are flawless.

Every mechanic knows the pain of missing sockets at 5 PM. With these foam cutouts, I just glance at the drawer and immediately know if my apprentice left a tool sitting in an engine bay. Best thing I bought for the shop.

The tool truck rep came by on Tuesday trying to sell me an empty box for four grand. I showed him this fully loaded Metallo with 370 tools and a wooden top for a fraction of that. He went quiet real quick.

Thought the wooden worktop was gonna be cheap particle board with a fake veneer. Nope, it's solid timber. Bolted my 4-inch bench vise to the corner and beat on ball joints yesterday, didn't crack or flex at all.

Had a hybrid battery disconnect to do on Friday. Having certified 1000V insulated drivers right there in the bottom drawer gave me total peace of mind. Nice thick grips that don't slip when your palms sweat.

Took six days to get to Victoria. Cardboard had a nasty tear on the side from a forklift fork, had me sweating bullets. Opened it up and thanks to the foam packaging there wasn't a scratch on the black paint.

Expected cheap sloppy 36-tooth ratchets at this price point. Pleasantly surprised to find they are fine-toothed. You only need a tiny swing to catch the next tooth in cramped engine bays.

Tossed four cans of brake cleaner, WD-40, and my PB Blaster in the side cabinet. Keeps the oily junk off the clean timber top and locks up so the other techs don't 'borrow' my chemicals.

Checked the included 1/2 torque wrench against our shop digital tester at 90 ft-lbs. Was within 1.5 lbs right out of the drawer. Used it on three sets of wheel lugs today with zero issues.

The Torx and Hex bits are pushed so deep into the foam that my fat grease-covered fingers struggled to grab the smaller ones. Had to use a pick to pop them up. They fit fasteners great though.

Doing a clutch swap on an Audi and ran into those stupid triple-square XZN bolts on the flywheel. Thought I was dead in the water, looked in Insert 3 and there they were. Paid for the whole cart right there.

My garage floor is a minefield of air hoses and extension cords. These heavy castors just roll right over them without jamming and dumping my coffee off the top. Foot brake holds tight.

Accidentally knocked over an open bottle of DOT 4 on the top. Wiped it up quick with a shop rag thinking the clear coat would peel, but it didn't leave a mark. Good sealant on the timber.

The combination wrenches have good length and thick beams. They don't dig into your palms when you're reefing on a rusted suspension bolt. Clean chrome finish that wipes off easy.

Tools came coated in a light preservative oil so they don't rust on the boat over. Spent ten minutes wiping down the chrome sockets with a clean rag before using them. Small nuisance, great tools.

Zipped off 20 rusted lug nuts on an old farm truck with my 1/2 impact gun. Used the 21mm socket on full beans, didn't crack, didn't strip. Proper chrome-moly steel.

Turn the key on the front and all seven drawers are locked shut. When I leave the shop on Friday afternoon, I know none of my tools are walking away over the weekend.

When you first pull off the plastic wraps, the cut foam inserts smell like fresh tires. Had to leave the drawers pulled out in the garage for two days to air out. Fine now.

Moved this right up next to the hoist. Everything I need for an oil change, brake job, or suspension overhaul is right at my waist. Cut my service time down by 20 minutes a car.

Finally an allen set with enough shank length to reach the rear intake manifold bolts on a Ford modular V8. The molded handles give great turning torque.

Driver dropped the wood pallet on the street curb and said company policy prevented him from rolling it up the driveway. Had to unbox it in the driveway in the rain. Loved the cart, hated the courier.

Hate when sockets drop the plug down into a deep cylinder head. The internal rubber boot in the 5/8 socket holds the plug securely while threading in.

Three of the guys came over on Sunday to help swap an engine. All they did was talk about the foam trays and play with the ratchets. Makes my messy garage look legit.